Dictation and voice
Dictate your messages with ⌘D, talk with Breini out loud, choose from the app's ten voices the one that reads replies to you, one for Spanish and one for English if you like, tune it, and see everything your voice can do, and call it with «Hey Breini».
You can talk to Breini instead of typing. Dictation happens on your Mac: your voice never leaves it.
Before you start
- The «Dictation and voice» group ready in first-run setup.
- Microphone permission. macOS asks the first time.
Steps
- Put the cursor in the composer.
- Press ⌘D (or the microphone button) to start talking.
- Speak normally.
- Press ⌘D again to finish. You can also hold ⌘D while you talk and let go when you are done.
- The text appears in the composer. Read it and press Enter to send.
- To cancel while dictating, press Esc: the composer stays as it was.
Voice settings
In «Settings» › «Voice»:
| Option | What it does |
|---|---|
| «Dictation language» | Where listening starts. Spanish and English are both heard, in dictation and on calls, and the one you speak is followed: you never need to change it to switch language. Dictation can also start in Portuguese, French, German, Italian, Chinese, Japanese or Korean: the list shows only the languages your Mac can recognize, and in Chinese and Japanese the words join without spaces. |
| «Send when you finish talking» | Sends the message as soon as you finish. Off, the text stays in the composer for you to read. |
Noise nearby
With a television or people talking nearby, on a call or while dictating: once you have spoken, the app tells your voice from that sound by its loudness. The noise no longer holds your turn open, gets into your words or cuts Breini off.
Talk with Breini out loud
A voice conversation with Breini, or with the chat's Nobreinier, like talking with a person.
- In the message box, beside the dictation microphone, press the voice-wave button. With the pointer over it, it says who you are about to talk with. It does not show in a group or an archived chat.
- The call's bar opens above the message box, with the name of who you talk with, how long it has run and what is happening: «Connecting…», «Listening», «Thinking…» or «Breini is speaking». The first time, macOS asks for the microphone, and the voice and the speech recognition get ready with their progress.
- Speak normally. What is said shows as captions in the bar; «Hide the captions» makes it smaller.
- To cut in, speak, or press «Interrupt» (the raised hand), which shows while it thinks or speaks. The voice is never cut off sharply: it fades down in an instant and goes quiet.
- To finish, press «End the conversation»: the soft red square, in the bar or on the message box's own button. While it saves it says «Saving the call…».
- A pause to think does not take your turn. If you stop in the middle of a thought, the app waits: it answers at once only when your words close the sentence and it is sure you finished; otherwise it waits for two and a half seconds of quiet.
- Real work goes to the chat. What you ask it to do during the conversation is done in this chat, and the bar lists each job with its state («in progress», «done», «failed», «stopped» or «not started»).
- What you ask is done, not just said. «Write me the answer», «put it in a note» or «send it by e-mail» are done for real: the conversation hands them to the chat together with what was said, so «the answer» is the one it just gave you. Your request shows in the chat as «From our call: …» and is done with everything the chat can do. A «yes, I'll write it» with nothing done no longer counts.
- If you interrupt, it knows what you heard. Breini counts as heard only the sentences that really played; if you cut it off mid-sentence, it knows and does not take as said what you did not hear. If you interrupted it as it was about to do something, that is not done by itself: on its next turn it does it if you still want it, or asks you.
- Your words on the call are your order. When it changes a setting of the app, what you say out loud on the call counts like what you type in the chat: ask it «change your voice» and Breini switches to the voice you name, from those in «Choose another voice» (see «The voices that read to you»). It is yours alone, on your call: no Nobreinier enters «Settings».
- When you hang up the chat gets a summary of the call, with «What you asked» and «What was done», and the transcript as a file.
- Ready to talk. While NoBreiniers is in front and you use the app voice, the voice stays ready, so the first answer of a call comes in about a second. It is let go a minute and a half after you leave the app, or at once if your Mac needs the memory.
- «Mute the microphone» lets you listen without being heard.
- If it says «This Mac does not cancel echo», talk when Breini finishes or press «Interrupt».
«Hey Breini»
Say «Hey Breini» (or «Oye Breini») and ask for anything without touching the Mac. The answer comes by voice.
- In «Settings» › «Voice», turn on «Answer to «Hey Breini»». It is off until you turn it on. The first time, macOS asks you for the microphone.
- Say «Hey Breini» and what you want, straight on or after a short pause: «Hey Breini, what is on my calendar today?».
- While it hears you, «I'm listening…» shows above the message box with the microphone's mark.
- Your request goes as your message to the chat you have open (Breini's or a Nobreinier's), or to Breini's latest chat when you are in a group, and the answer is said aloud in that chat's voice.
- All on your Mac. The phrase is heard on your Mac and no sound leaves it. Only your request's text is kept, as your message in the chat: not the sound, and nothing heard before the phrase.
- The microphone stays on while it listens, and macOS shows its microphone mark in the menu bar the whole time.
- It does not wake to its own voice. While the app reads aloud (a reply, a voice sample) it hears nothing, nor the room's echo just after.
- It pauses by itself, with the microphone closed: during a voice call with Breini, while you dictate, while another app uses the microphone (a video call, for example) and, if you choose, while the screen is locked («Pause while the screen is locked», on by default). «Settings» › «Voice» says why it is paused.
- Where it hears you best. Near the Mac and without much noise. With the TV loud, in a very echoing room or from across the room it may not hear you: come closer, speak a little louder or say it again.
- Say it your way. It hears you alike whether you say the name the Spanish way or the English way («Hey Brainy»): what counts is how it sounds, not how it is spelled. Both words are needed: «Breini» alone does not wake it, and at «Normal» or «Low» neither does a name that sounds close («Hey Bernie», «Oye Brenda»).
- «How easily it hears you»: «Low», «Normal» or «High». Higher hears you better through noise, echo or from afar, at the cost of waking now and then on a name that sounds very close; lower, the other way round. Close to the Mac and without noise, all three hear you.
- If you renamed Breini, the phrase uses the new name («Hey» and its name).
- The first time you turn it on, the app learns the phrase with its own voices, in about twenty seconds. It needs the app's voice and the dictation model on your Mac (the «Dictation and voice» group of the first-run setup).
What your voice can do
Breini and every Nobreinier know all of this and do it for you: ask in your own words, or use the controls in «Settings» › «Voice».
| You want to | How |
|---|---|
| Hear an answer or a text | Ask Breini to read it to you («read it to me out loud»), or press the play button on the reply. «Read new replies aloud» in «Settings» › «Voice» reads every new one. |
| Get an audio file | Ask for a text as audio: it arrives in the chat to play, keep or send, in the same voice that reads you the answers. If you want another voice, say which. See «Who speaks and who listens» below. |
| Talk out loud | Press the voice wave beside the microphone and talk with Breini or the chat's Nobreinier (see «Talk with Breini out loud» above). |
| Change a voice | Ask Breini to change its voice, or a Nobreinier’s, in Spanish or in English. |
| Change how it sounds | Ask for slower, faster, lower, higher, warmer or brighter: speed, pitch, warmth, brightness and volume. |
| Hear the voices | Ask Breini which voices there are, or to let you hear one say a line. |
| Turn speech into text | Ask Breini to write down what a recording or a video says: it listens on your Mac, and uses credit only if you chose an ElevenLabs voice (see Listen to and watch videos). |
By default Breini speaks with this app’s own voice on your Mac. You can choose a voice from a connected voice service instead in «Settings» › «Voice»; Breini never changes it by itself.
The app makes no new voices and copies none: it has its ten, and the voice you hear changes only when you ask.
Which voice speaks
At the top of «Settings» › «Voice» you always see «Which voice does Breini speak with?»: the voice's name, a line about it and its play button. It is one voice for Spanish and English. If you gave each language its own voice (see «More options» below), you see a row for each language. When a Nobreinier speaks with another voice, «More options» lists them with their voice; each one's voice is chosen in its card.
Choosing a voice never asks who makes it: the voices of the app are made on your Mac, and a voice of your ElevenLabs account is spoken by ElevenLabs. Pick whichever you like in «Choose another voice»; the app moves both languages to it, so Breini never reads a reply half with one voice and half with another. If a voice name is both in the app and in your ElevenLabs account (for example «Lucía»), the account's speaks when you picked an ElevenLabs voice in «Choose another voice», and the app's otherwise.
Who speaks and who listens
All speech is the app's own voice, and all hearing is on your Mac. ElevenLabs is only for speaking and listening, if one day you choose one of its voices.
- Reading a text or making it audio. Ask Breini, or a Nobreinier, to read a text out loud («read it to me out loud», «read your last answer») or to make it an audio file («make me an audio of this text»). It is one thing with two forms: said now, through your Mac's speakers, or a file that arrives in the chat to play, keep or send; if you ask, it is also saved in your project. It speaks with its own voice, the one you hear reading the answers, in Spanish and in English.
- With the app voice (the usual) it is made on your Mac, for free, and nothing leaves it. The first time, if the voice is still downloading, Breini tells you and never uses another voice meanwhile; if it was a file, ask again when it is ready.
- Another voice. If you want a different one, say which of the app's ten voices (those in «Choose another voice»). A voice of your ElevenLabs account can be asked for only if you chose one of its voices.
- Listening to a recording or a video is also on your Mac: see Listen to and watch videos.
- ElevenLabs. It speaks and listens only if you choose one of its voices in «Choose another voice». Its key in «Accounts» uses no credit by itself.
- If your permissions ask to approve it, the card reads «… wants to say something in its voice, out loud or as an audio file» and, if you asked to keep it, under what name.
- When someone from your business writes to a Nobreinier from their phone, the Nobreinier does not speak out loud on your Mac: the audio reaches that person as a file.
The voices that read to you
NoBreiniers reads replies aloud sentence by sentence, each in its own language, with the voice you chose. The app has ten voices, five men's and five women's, and each speaks Spanish and English. Breini starts with its own, a warm, low man's voice. «Settings» › «Voice» is laid out in the order you ask for things:
- «Which voice does Breini speak with?»: the voice in use, with its play button.
- «Choose another voice»: press the play button on a card to hear a short line, and «Use» to keep that voice. The app's ten voices come first under «Voices of NoBreiniers», each with a line on how it sounds. With an ElevenLabs account connected you also see «Voices of ElevenLabs»: each card says if it is a man or a woman and its accent, a search finds one by name, and «See all …» shows the rest. Without that account, a line asks «Have an ElevenLabs account?» and its key button takes you to «Accounts».
- «Reading aloud»: set the «Speed» and the «Volume», and turn on «Read new replies aloud» if you want every new reply read as it arrives. The speed, the volume and the tuner belong to each voice: what you set on one voice stays with it, and another voice speaks with its own.
- «Dictation» and «Hey Breini»: see above.
- «More options», folded: «A different voice for each language» (turn it on and «Spanish» and «English» buttons appear: what you pick and tune is for that language only, and «Use for both» gives the other language the same voice), «Tune the app voice» (or «Tune the ElevenLabs voice»): the «Tuner», with pitch, warmth and brightness, applied on your Mac, the Nobreiniers that speak with another voice, the voice's files on your Mac and «What your voice can do».
While a reply is read aloud, the word being said is lit in the text, with a soft fill. The same happens with a voice note in the chat: when you play it, what it says shows below it, the word being said is lit and, if you press a word, it plays from there. Each word's time comes from the sound itself, heard on your Mac; without the hearing model the whole sentence is lit. A voice note's words come from its first fifteen minutes, heard little by little in the background so nothing slows down; if your Mac cannot hear it yet, its words appear on a later play. On the phone the word is lit too when your Mac reads you the reply.
The first time you listen, the app voice is downloaded to your Mac (about 385 MB, once) and kept encrypted on your Mac. It is heard at 44.1 kHz and made on your Mac, with no connection needed. If you moved your files from another Mac, the voice encrypted there does not open on this one: the app notices it when opening it, downloads it again once and keeps it encrypted for this Mac.
If you made, mixed or cloned voices with an earlier version, they stay saved in your profile but no longer speak: where they were, Breini speaks with its own voice. Choose another in «Choose another voice» whenever you like.
If something goes wrong
| Message | What to do |
|---|---|
| «NoBreiniers cannot use the microphone…» | Turn it on in System Settings › Privacy & Security › Microphone and try again. |
| «NoBreiniers cannot use speech recognition…» | Turn it on in System Settings › Privacy & Security › Speech Recognition and try again. |
| «A management profile blocks this Mac’s microphone.» | Talk to whoever manages your Mac. |
| «No on-device dictation model for …» | Choose another dictation language. |
| «This Mac has no microphone connected» | Plug in a microphone or a headset with one. |
| «Paused: … is using the microphone» | Another app has the microphone; «Hey Breini» listens again as soon as it lets go. |
| «The app's voice is not on this Mac yet…» | Listen to a voice in «Settings» › «Voice» so it downloads, and turn «Hey Breini» on again. |
| «Hey Breini» does not answer | Raise «How easily it hears you» to «High» and speak closer to the Mac. |
