# Stop, steer or queue

> Stop the agent, correct it while it works, queue your message, ask on the side with /btw, or pause a Nobreinier without losing its place.

Chats · Updated: 2026-11-11 · version 2.0.264 · https://nobreiniers.com/en/help/stop-and-steer/

While an agent works you can stop it, steer it with a message, or queue your message for when it finishes.

## Stop

1. Press «Stop» in the title bar, or ⌘.
2. What is running in the chat or group on screen stops.

Stopping helpers (from the «Subagents» panel, or stopping or pausing a Nobreinier's or a Bot's work) costs no model calls, however many there are: each shows as stopped, and your agent learns which ones in one block when you write your next message.

«Stop» also reaches the messages the stopped work sent to other agents: one that was waiting for its turn no longer starts, and one another agent was answering is cut. It happens quietly, so the chat you stopped does not wake up on its own; if that work had in turn sent other messages, they stop too.

## Join in or wait

1. Type your message while the agent works.
2. Press Enter or ⌘Enter:
   - **Join in (step in):** the agent reads your message now and changes course. This is what Enter does unless you chose otherwise.
   - **Wait:** your message waits until it finishes.
3. You choose what Enter does in «Settings» › «Agents & helpers» › «Advanced» › «Enter while an agent works»: «Send it when it finishes» or «Send it now; it takes it into account». ⌘Enter does the other one, and so does the small icon beside the send button.

The message box says it while the agent works: «Message · Enter: interrupts and steps in now · ⌘Enter: queue», or, if you chose «Send it when it finishes», «Message · Enter: queue · ⌘Enter: interrupts and steps in now». The same goes for a message that comes from your phone, from a channel or from a quick entry. When the agent is running an automatic job (an automatic task or a card), your message waits behind it.

Your message shows at once: in the chat, or in the queue below when the agent is working, with its attachments. If sending fails, your words come back to the message box.

### When you step in, it lands at once

Your message does not wait for the agent to finish what it is doing. It reaches it wherever it is:

- **While it thinks or writes its answer:** the answer is cut where it stands (what you already saw stays in the chat), nothing of the cut answer is carried out, and the agent's next move already carries your message.
- **While it works on a page** in several quick steps, **replays a recipe** or **waits for a page**: it stops between two moves, says what it did and reads your message next. A move already under way is finished, not left half done, and a recipe stopped this way does not count as a failure.
- **While it runs a long command:** your message is read between its moves as well.
- **When it already answered and is still checking or closing its work:** that check is dropped and your message goes in right then.

«Stop» is different: it ends the whole turn. Stepping in only turns the agent toward what you wrote.

### Change the model while it works

You can change the model, the reasoning level or the account in the message box while the agent works. The change applies from its next step: a request already under way finishes as it started, and the agent goes on with everything it had done, without starting over.

Commands that need no thinking, such as /context, /doctor, /help, /agents, /hooks, /memory, /skills, /pause or /resume, answer at once even while the agent works: they don't go to the queue. Other commands wait their turn.

## Pending messages

Queued messages appear under «Pending messages». You can «Edit pending message» (also when it has files), «Remove pending message» or «Step in with the pending message» (the arrow, which reads «Step in now» when you rest the pointer on it). Two more things:

- **Change the order.** Each row has a grip: drag it up or down (a line shows where it will land; Esc cancels), or focus the grip and press ↑ or ↓. The status line says «Queue order changed.»
- **Take a message back.** The icon «Take back into the message box» puts the words in the message box before whatever you are writing, with its files; nothing is deleted. It says «Message taken back to the composer.» Only your own messages can be taken back or edited.

This is for messages that wait. A message you already sent is changed with its pencil, «Edit this message», when the agent is not working: see [Edit a message of yours](https://nobreiniers.com/en/help/go-back-and-undo/).

The arrow works while the agent runs and until it takes your message; the message's line then reads «Going in now», instead of «Queue», and the message lands at once as described above.

A message that waited in the queue gets the same whole turn as one you send while the agent is free: what it remembers of you, your library and your books, your automatic steps ([hooks](https://nobreiniers.com/en/help/hooks/)), the instant answer to a simple question and resuming by itself when the model's service fails. Before 2.0.142 a queued message ran a cut-down turn, without any of that.

## If the service fails in the middle of an answer

What you already read stays in the chat. The agent goes on from where the answer stopped, instead of writing it all again; in the Steps view the line reads «Retry 2 · went on from what was already written». A call to a tool that had only half arrived is never run, and the agent is told it never arrived.

## Ask on the side: /btw

A quick question about the chat on screen, without stopping the work or entering the chat.

1. In the message box, write «/btw» and your question, and send it. You can also pick «Side question» in the / menu.
2. A «Side chat» card opens over the chat, just above the message box. It shows «Thinking…» and then the answer as it is written.
3. To ask more, write in «Follow up…» and press Enter or «Ask».
4. The trash icon («Clear the side chat») empties it; «Close (Esc)» closes it.

The side chat knows the chat up to its latest step, uses no tools, and nothing of it goes into the chat or into what the agent does next. Its questions and answers stay while that chat is on screen; when you open another chat, it closes and an answer on the way stops. «/btw» with nothing after it just opens the card.

## Pause or stop

**Stop ends the work.** «Stop» (or ⌘.) ends what is running in the chat on screen; it does not pick up again by itself.

**Pause keeps its place.** A paused Nobreinier starts nothing on its own until you resume it, but it does answer your messages. What it was doing waits where it was, and on resume it carries on from there:

- an automatic task the pause cut runs again;
- a card it was working on goes back to its column, not to review;
- a message from another Nobreinier or a chat waits in its queue, unanswered, and gets its answer on resume;
- a group round waits, with what the room owed and what you wrote meanwhile;
- a goal stays armed.

To pause one Nobreinier:

1. In the sidebar, press «Nobreiniers» and open the Nobreinier.
2. Press «Pause» («Nothing starts on its own until you resume it; it does answer your messages»). The window closes.
3. To go on, open it again and press «Resume» («It works on its own again»).

You can also ask Breini in your own words, for example «pause Ana».

## A goal that goes in circles

If two rounds of a goal in a row are stopped because the agent was repeating itself, the goal pauses and tells you. Type `/goal resume` to go on.

## A goal when the model's provider fails

If the model's provider fails while a goal is working (it is down, too busy, or the connection is lost), the goal does not disarm: it waits, tries again by itself a little later, each time after a longer wait, and says so with «Goal waiting for its provider», with the reason, since when and when it tries next. That wait is kept even if the app updates or restarts. When the provider answers, the goal goes on from where it was. If the plan's limit is spent and says no time for renewal, the notice «Plan limit reached: I'll keep checking» says it will check again and goes on by itself when it renews.

A failure that waiting will not fix (a key the provider refused, a model that no longer exists) pauses the goal instead: «Goal paused: it needs you» tells you once, and `/goal resume` tries again after you have changed what was wrong. Nobody picks another model for you.

## A spending cap: /budget

Type `/budget` followed by an amount to cap what a conversation spends, its helpers included: in tokens (`/budget 2M`, `/budget 500k`) or in dollars (`/budget $5`). `/budget` alone says how much it has spent, and `/budget off` removes the cap.

- At 80 %, your Nobreiniers finish the most important part and wrap up.
- At the cap, the chat says «This conversation reached its budget (…)», you are told, and no further request of that conversation goes out until you raise or remove it.
- Only you set it: an agent cannot change it.

## Pause everything

To pause all your agents' automatic work, use «Settings» › «Agents & helpers» › «Pause all automatic work», or «Pause the automatic work» from the menu bar icon. Automatic tasks, cards, messages between Nobreiniers, networks and goals stop now and wait until you resume, as above. Your own chats keep working and your messages are still answered. A Nobreinier you paused on its own stays paused when everything resumes.
