# My computers

> See every computer on your networks, connect the ones you want with their user and password, or with a key you already use, and check or disconnect the connected ones.

Settings · Updated: 2026-11-13 · version 2.0.291 · https://nobreiniers.com/en/help/my-computers/

«My computers» lists the computers that are alive on the networks your Mac is on, and on your private network if you have one. For each one it says what it is and, in one line, whether you can connect to it now or what is still missing. Looking does not sign in to any computer, does not install anything on them and does not keep what it sees. To connect a computer, you do it once, with that computer's user and password, or with an ssh key you already use to sign in to it. With a computer connected, your Nobreiniers and your routines work on it as on your Mac: they write its name and a colon before a folder or a file, like «Office:~/Documents», or «Office:» for its home folder. Each command or change there asks you just as on your Mac, with a notice that reads On «Office» (macOS): and what it is about to do. What they delete there with the usual delete commands stays in «To delete», in its home folder (on Windows, only what Remove-Item deletes). A message from someone outside never reaches a computer.

## Open it

1. Open «Settings» (⌘,) › «My computers».
2. Wait a moment while it looks at your networks. It looks again whenever you open the page after a minute or more, and when you press «Refresh».

## What you see

- One group for each network your Mac is on, such as «Network 10.77.77.x», and one for «Your private network». Each group has its own «Refresh» button.
- Each computer shows its name and, under it, what it is: a Mac, a Windows computer, a Linux computer, a file server, a printer or a router. When a computer lets you connect but does not say what system it runs, and its name does not say it either, it shows as «Computer»: nothing is guessed. Your own Mac shows once, as «This Mac».
- Rest the pointer on a computer to see its address. The addresses are not written on the rows.
- Phones, tablets and devices nothing is known about fold under «Other devices». Open that line to see them.
- The box at the top searches by name, kind, status or address.

## The line under a computer

| Line | What it means |
|---|---|
| «Can connect» | The computer answers for remote login. |
| «Needs “Remote Login” turned on» | It is a Mac that does not answer for remote login. On that Mac, open «System Settings» › «General» › «Sharing» and turn on «Remote Login». |
| «Needs “OpenSSH Server” turned on» | It is a Windows computer that does not answer for remote login. Turn on the «OpenSSH Server» feature in its settings. |
| «Files only» | The computer shares files and nothing more. |
| «Not connected now» | The computer is on your private network, but off or asleep. |
| «Nothing answered» | You added this address and nothing answered there. |

Phones, printers, routers and your own Mac have no line.

## Add a computer by address

1. In «Add by address», type an address like `192.168.1.20`, or a name like `studio.local`.
2. Press the **+** button («Check»). The computer shows in «Added by address» with the same lines as the others.

Only addresses of your own networks are accepted. Press the trash icon on a row to take it off. The list of addresses you add is not kept: it is gone when you close NoBreiniers.

## If it says it has no permission

macOS asks you once to let NoBreiniers see your local network. If you said no, the page says «NoBreiniers has no permission to see your network.» Press «Open Local Network settings», turn on NoBreiniers and press «Refresh».

## What it does to each computer

On each «Refresh» it asks every computer once, at each of five doors: remote login, file sharing (twice), Windows remote desktop and Mac screen sharing. When remote login answers it reads the first line the computer says about itself, and when file sharing answers on a computer that is not a Mac it asks for its name once. It changes no setting on any computer.

It tries every address of every network your computer is on, one after another, the one your router is on first. Each network of up to 254 addresses takes up to 16 seconds, so a computer that announces nothing is found too, on any of your networks. On a very large network (more than 254 addresses) it only shows the computers that announce themselves, and the page says so under that network.

> **Note:** Looking at the computers on your networks is only your own click in this page. No agent, tab or program can start a look, read the list or check an address for you.

> **Note:** On Linux, «My computers» shows your private network and the addresses you add.

## Connect a computer

Connecting is done once for each computer.

1. Press the link icon («Connect») on the computer's row. It shows on the ones that say «Can connect» and on the ones that only need their access turned on.
2. **Turn on access.** The guide says how to do it on that computer:
   - On a Mac: «System Settings» › «General» › «Sharing», and turn on «Remote Login».
   - On Windows: «Settings» › «System» › «Optional features», add «OpenSSH Server», then start it in «Services».
   - On Linux: install the OpenSSH server and turn it on.

   For a computer shown as «Computer», the guide lists these three, and you follow the one for that computer.

   Press «Check». When it says «It answers. You can go on.», go to the next step.
3. **That computer's user and password.** Type the user you sign in to it with and press «Connect». When that computer asks for the password, type it in the secure field and press the arrow («Send»). You type it, or whoever uses that computer.
4. **Done.** The guide says «Connected». Give it any name you like and press «Done».

With the computer's password, you or whoever uses that computer types it once; NoBreiniers hands it to ssh for that connection only and never keeps it. It never guesses or forces anything.

> **Note:** The password is used only to connect it, and it is not kept. When it connects, NoBreiniers makes its own key for that computer and leaves it there. The key stays on this Mac, in its security chip when it has one, and works only for NoBreiniers.

### With a key I already use

If you already sign in to that computer with an ssh key, in step 3 choose «With a key I already use» instead of «With the computer's password». Leave «Your key file (empty: the keys in your ssh agent)» empty to use the keys in your ssh agent (this Mac's), or type the path of your private key, for example `~/.ssh/id_ed25519`. NoBreiniers uses your ssh agent or the key file you pick, not your ssh settings file. If your key has a passphrase, add it to your ssh agent first (in Terminal: `ssh-add` and the path of your key) and leave the file empty: NoBreiniers never asks for or receives the passphrase.

Your key is used by your own ssh, with your ssh agent or the key file you pick, only while connecting, to leave NoBreiniers' own limited key on that computer. NoBreiniers never reads, copies or keeps your key, and never asks for or sees its passphrase.

Your key is used only at that moment: afterwards NoBreiniers always signs in with its own key, even when your agent is gone or you delete your key. Everything else about the connection is the same as with the password.

If it did not connect, the guide says why in one line:

| Line | What to do |
|---|---|
| «The user or the password did not work. Try again.» | Check the user and press «Connect» again. |
| «Could not reach that computer…» | Check that it is on, on your network and with its access turned on. |
| «I got in, but could not leave the key there…» | That user cannot save files in its own folder. Use another user of that computer. |
| «Another connection is under way…» | Wait for the other one to end. |
| «That computer did not accept your key for that user…» | Check that your key is among that user's authorized keys there. If your key has a passphrase, add it to your ssh agent (in Terminal: `ssh-add` and the path of your key) and leave the file empty. Or connect it with the computer's password. |
| «Your ssh agent was not found on this computer…» | Type the path of your private key, or connect it with the computer's password. |
| «Your ssh agent holds no keys…» | In Terminal: `ssh-add` and the path of your key. Or type the path of your private key. |
| «That key file was not found…» | Check the path: it is the private key, not the one ending in .pub. |
| «Others on this computer can read that key file…» | In Terminal: `chmod 600` and the path of your key. Then press «Connect» again. |

## Your connected computers

Connected computers show at the top, in «Connected». Each one has three buttons:

- **Check** (the circle with the tick): signs in with its key and leaves. It says «Connected. It answered just now.» or what happened, for example «It does not answer now. Is it on and on your network?».
- **Rename** (the pencil): type the new name and press Return.
- **Disconnect** (the plug): press it twice. First it deletes the key on this Mac; then, if the computer answers, it takes off the line NoBreiniers left on it; last, it takes it off the list.

If the computer did not answer when you disconnected it, the page says «An old line of ours was left on that computer; it no longer works. It is removed by itself the next time you connect it.» That line opens nothing any more, because its key was deleted.

## If a connected computer changed

If a connected computer answers with another key (it was reinstalled, or another computer now has that address), NoBreiniers stops using it and does nothing on it. Its row says, for example: «The office Mac is no longer the same computer you connected (its key changed). I did nothing on it. If it was reinstalled, connect it again.»

If you know it is the same computer, press «Connect again» on its row and follow the guide. If not, press «Disconnect».

> **Note:** Connecting, checking, renaming and disconnecting are done only from this page. Your Nobreiniers cannot connect or disconnect computers.
